Features

• Easily applied and removed. Just a toothpick is all you'll need to install and a hobby knife to remove
• It's ready to go - no multi-part mixing
• No disassembly, special tools or surgical skills required
• Cures at room temp in moments. No baking or nasty fumes
• Can be thinned out with plain 'ol water, if so desired
• It is easy to see your work, and it cures to virtually invisible
• Very thin once cured – only .0055" or less
• Leaves no residue on the track, and no gunk in your engine
• Universal - works for any loco from any manufacturer in any scale

Technical Notes

Notice that the wheels need to be 'bare'. BULLFROG SNOT does not like fresh factory blackened wheels, so scuff 'em clean or BULLFROG SNOT will not want to stick.

VERY important!
Keep the wheels turning as the BULLFROG SNOT cures until the color is gone, maybe 10 minutes or so. (Ignore this and gravity will give you a lumpy tire.)

Let it fully cure for a few hours or better, overnight.

Search Terms: sc2017