E-flite is dedicated to providing electric RC pilots with a complete line of aircraft and accessories that use the latest in electronics and aeronautical technology. That is why they use only top quality engineering and materials in everything they produce. The result, high performance excitement that has rarely before been seen in similarly priced aircraft. To make sure hobbyists electric experience is always positive one, E-flite continues to provide the best customer service and support.
E-flite electric aircraft models are designed and developed by the world's best modelers, including Quique Somenzini, Mike McConville, George Hicks, and Peter Goldsmith. These guys know why hobbyists fly electric and put their engineering and modeling knowledge to great use in designing aircraft with the quality and performance that both they and enthusiasts want most.
Enticement F3P
The Enticement F3P is an easy-to-handle, attractive flat foam model that offers incredible aerobatic flight and precision characteristics. It is constructed primarily of 3mm Depron foam which means the Enticement is sure to please with solid stability, response, and strength. The lightweight, leaser-cut Depron foam construction, carbon fiber support rods, and carbon fiber firewall set a new industry standard for quality, performance, and durability. For any hobbyist looking into an extremely lightweight, indoor foamie that excels in precision aerobatic flight and is easy to handle, the Enticement is sure to catch the eye of even the most steadfast RC pilots.
Divo 3D
Designed by 3D champion pilot Quique Somenzini, the Divo 3D is built to be as adept at slow speed 3D as it is precision aerobatics. The biplane design not only provides sharp roll response, but it gives the Divo 3D superb slow flight stability so that you can fly high-alpha 3D with a punch. Its carbon fiber reinforced Depron foam construction provides the solid and precise in-flight feel of a balsa profile plane but without the weight. This makes it possible to fly the Divo 3D outside in windier conditions that would keep most other profile foamies on the ground.
Sobre 3D
The Sobre 3D ARF that was designed by George Hicks and Jon Leyland has superb slow flight responsiveness so hobbyists can fly high-alpha 3D flights with authority. The Depron foam construction that is carbon fiber reinforced provides the precise, solid feel of a balsa profile plane. This helps keep the Sobre 3D in flight even on those breezier days.
Extra 260 3D
The Extra 260 was designed to give profile 3D foamie fans a great looking and lightweight plane with competition-level performance. At the center of its superb flight characteristics is a rigid, carbon reinforced Depron foam airframe. This unique design eliminates flex so control response is precise and crisp. Because it was designed for competition level performance, the Extra 260 accepts the hottest brushless motor options available, including E-flite's Park 370 Hollow-Shaft Brushless Outrunner Motor matched with a ShowStopper Precision Variable Pitch Prop System.
Funtana 300
The built-up, lightweight foam Funtana 300 model improves upon other similar designs in the market by offering improved strength and stability. Compared to its competition, the Funtana 300 is easier to assemble and utilizes only high-quality construction and manufacturing techniques so it can be flight ready in as few as three hours. It also has lightweight Depron foam construction and carbon fiber support rods, setting a new industry standard for durability, quality, and performance. These features, along with the built-up foam fuselage make this sturdy enough for both indoor and outdoor sport flying in up to 10 mph winds.
Jenny JN-4 Slow Flyer 250
The Curtiss JN-4 Jenny first entered service during WWI as a primary trainer for the fledging US Army Air Corps. After the war, surplus Jenny's found fame with entering barnstormers who crisscrossed the countryside performing air shows and giving jaw-dropped passengers their first taste of flight. E-flite captures the magic of this golden era in the history of flying with the superb Jenny replica. In addition to its outstanding scale detail, E-flite has given this Jenny excellent slow flight characteristics that make it perfect for indoor flight.
Super Airliner DF
The Super Airliner DF is a great looking ducted fan jetliner that boasts an impressive 55 inch wingspan and flies like a dream. Getting it flying is a real pleasure too. E-flite eases the transition from box to sky with features like factory painted EPS parts, molded servo pockets that make assembly and electronics installation a snap, and factory installed ducted fan units.
Taylorcraft 450
E-flite has perfectly captured the spirit of Taylorcraft with this outstanding ARF model that is an absolute gem to fly. To keep the true-to-scale lines unspoiled, E-flite has designed the Taylorcraft 450 with internal servo mounts that are concealed from view. A classic cream and red UltraCote trim scheme, factory-painted fiberglass parts, and cockpit details further enhance the realism. When in the air, the Taylorcraft 450 offers a nice balance between stability and maneuverability that will please both the intermediate and experienced pilot.
Blade 400 3D RTF
The Blade 400 3D will give intermediate to advanced heli pilots a ready-to-fly experience like no other. It comes 100% factory built right out of the box and equipped with state of the art features like brushless power, a heading lock gyro, digital servos, CCPM control, and symmetrical blades. It is also big enough that you hobbyists can fly outdoors in windier conditions that would ground similar micro-size RC helicopters. Plus, it is equipped with a Spektrum DX6i computer programmable transmitter with full-range capabilities, helicopter and airplane programming, and 10-model memory so pilots can have the transmitter that is perfect for the Blade 400 and just about any other model too. Because the Blade 400 is flight tested at the factory, there is no difficult pre-flight setup required which allows pilots to take right off with smooth hovering to 3D aerobatic flight just as soon as the battery is charged.
Blade CP Pro RTF
Intermediate and experienced pilots looking for instant micro-heli aerobatic gratification need to look no more - E-flite Blade CP Pro. Based on the tried and true Blade CP platform, the Pro adds the lightweight power of a 3S 11.1V 800mAh LiPo battery, the upright or inverted agility of symmetrical main rotor blades, and the lightning quick cyclic response of Bell-Hiller mixing. Plus, it can easily be upgraded with a brushless power and heading lock gyro, without the need for a difficult modifications or a new radio system. If you are looking for red hot micro helicopter aerobatics in the time it takes to charge a battery pack, nothing else comes close to the cutting-edge Blade CP Pro.
Blade CP+ RTF
The Blade CP+ is the perfect next step for anyone who has mastered the basics of heli flight with a coaxial RC helicopter like the Blade CX or CX2, and is now ready for a model capable of more advanced maneuverability. The Blade CP+ includes all the impressive features of the original Blade CP, such as CCPM and collective pitch that will allow you to transition from forward flight to hover with smooth, solid control. You can even use negative pitch for aerobatics like rolls, loops, and inverted flying. The Blade CP+ also includes a number of new accessories and features that further enhance its flight performance for low-time and experienced pilots alike. No other micro-sized RTF heli provides this much control and aerobatic potential at a price so affordable.
Blade CX2 RTF
The Blade CX2 takes the beginner-friendly flight stability and excitement of the original Blade CX and adds Spektrum 2.4GHz DSM radio control technology that lets you fly anytime, anywhere without having to every worry about interference. The factory installed 3-in-1 Control Unit is a lightweight combination of main motor mixer, rate-mode piezo gyro, and main motor electronic speed controls. The 3-in-1 unit also features unique software that allows the main motor mixer and rate-mode piezo gyro to be disabled. This, along with the included Spektrum AR6100e receiver, allows an optional heading lock-type gyro to be used for yaw control. Two featherlight S60 Super Sub-Micro Servos provide powerful and precise cyclic control. Topping it all off is an aggressive body design that looks fantastic on the ground and in flight.
Blade CX RTF
When it comes to micro heli fun that anyone of any age can enjoy, no RC helicopter in its class comes close to the performance and value of the original Blade CX. it is completely assembled and ready-to-fly with a coaxial counter-rotating head design that is so stable almost any newbie or first-time pilot can be hovering like a pro in not time.
|
