Seagull Models designs and manufactures a wide variety of Almost Ready-to-Fly RC Aircraft to suite any modeler's skill level and taste. All Seagull's airplanes feature built-up construction using only high-quality balsa and plywood. They are hand built, covered, and trimmed by professional craftsmen. They are expertly covered and trimmed in genuine Hangar 9 UltraCote and include almost everything you need to get into the air, including spinner, fuel tank, engine mount, wheels, landing gear, control horns, clevises, pushrods, and all necessary fasteners and instructions. Some of the planes also include factory painted fiberglass cowls, wheel pants, and preinstalled pilot figures when appropriate.
EP Class Airplanes
EP Extra 300 ARF - Model SEA7000
Seagull's first electric RC airplane is a great looking sport aerobatic model ready to be put through its performance paces. The exciting EP Extra 300 ARF provides the latest lightweight balsa and plywood construction techniques, laser-cut for the most accuracy possible. Sport aerobatics and smooth park flying performance feel effortless with the kick of an E-flite outrunner motor as the power source. The top hatch is designed for easy access - just pop it off to conveniently access and retrieve your speed control and battery. The practical two-piece plug-in wing makes it no strain to get the plan to the flying field. Also, the fiberglass cowl and high quality UltraCote trim scheme mark the EP Extra 300 ARF as a park flyer of value and class.
- Wingspan - 43 inches
- Length - 38.4 inches
- Wing Area - 367 square inches
- Weight - 27-32 ounces
- Radio - 4 channels with 4 sub-micro servos
- Motor - Park 450 or Park 480 outrunner
EP XRay ARF - Model SEA7025
Seagull's X-Ray EP is an excellent high performance electric sport flyer with its light weight and extremely low wing loading. Designed for intermediate to expert pilots, the X-Ray is an appealing 3D aircraft that flies easily and assembles quickly. It has a fiberglass cowl and great looking UltraCote covering. The X-Ray's plug-in wing means that it is easy to fit into a compact car or smaller vehicle. Also, the easy-access top hatch lets hobbyists conveniently get access to their electronics with ease.
- Wingspan - 39 inches
- Length - 39.6 inches
- Wing Area - 341 square inches
- Weight - 21-24 ounces
- Radio - 4 channels with 4 sub-micro servos
- Motor - Park 450 or Park 480 outrunner
Gas 3D Aerobatic Airplanes
Bling 3D 50cc ARF - Model SEA4050
The Seagull Bling is specifically designed and optimized for advanced 3D aerobatics. Pair it up with an Evolution 45GX2 gasser and you're talking some serious moves. With twin servos controlling each aileron, the Bling flies much like a large foamy by performing flat spins, high-alpha flight, easy harrier rolls, and many other tough 3D maneuvers. The Bling is well constructed using lightweight balsa and plywood, and its flashy Hangar 9 UltraCote trim scheme will lure all the onlookers at the flying field. The plug-in wing and stabilizer are easy to store at home or when transporting to the flying field. And with the convenient top hatch, it is easy to access the inside electronics.
- Wingspan - 71 inches
- Length - 78.7 inches
- Wing Area - 1488 square inches
- Weight - 14.3-16.5 pounds
- Radio - 4 channels with 8 servos
- Engine - 45-50cc gas
Harrier 3D 46 ARF - Model SEA3025
Are you looking for high-performance 3D handling? Then look into the Seagull Harrier 3D 46 ARF. It is built from top-quality balsa and plywood similar to that found in Hangar 9 airplanes. The Harrier 3D can easily perform both sequence and 3D style aerobatics. Solid harriers without wing rocking are a cinch of course, but the plane's effortless performance with rolling circles, blenders, and especially torque rolls allows the pilot to develop their aerobatic skills.
- Wingspan - 48.5 inches
- Length - 56.5 inches
- Wing Area - 734 square inches
- Weight - 5.5-6 pounds
- Radio - 4 channels with 6 servos
- Engine - .46-.52 2-stroke or .65-.82 4-stroke
Super Star 120 ARF - Model SEA3075
Seagull's Super Star 120 looks and performs like an expensive large scale model, but actually much less than most. This distinguished giant-scale performer is built from top level balsa and plywood covered with UltraCote. It flies so smoothly that it hovers, and taut axial rolls feel like extensions of the pilot's hands. Seagull has made certain to include the Super Star 120 with progressive styling and performance completely up to date with the latest RC airplane trends.
- Wingspan - 69.3 inches
- Length - 62.6 inches
- Wing Area - 846 square inches
- Weight - 10-11 pounds
- Radio - 6 channels with 6 servos
- Engine - 1.00-1.60 2-stroke or 1.20-1.80 4-stroke
Extra 300S 60 ARF - Model SEA2025
The Seagull Extra 300S 60 is a great airplane for IMAC competition in Sportsman and intermediate classes. it is a great performer, tracking like it is on rails as it executes snaps, spins, point rolls, and knife-edge flight perfectly. Try some waterfalls, blenders, and harriers on for size while you're at it because this beauty can take a beating. Do not let the competition's high prices scare you away from owning an IMAC caliber airplane because Seagull brings high-quality at affordable prices.
- Wingspan - 63.5 inches
- Length - 45.5 inches
- Wing Area - 768 square inches
- Weight - 6-7 pounds
- Radio - 4 channels with 5 servos
- Engine - .61-1.00 2-stroke or .65-1.0 4-stroke
Edge 540 60 ARF - Model SEA4000
Are you ready to move up to more advanced aerobatics? Look no further, Seagull's improved Edge 540 enjoys stronger lightweight construction and enhanced flight performance to match its vibrant new trim scheme. Knife-edge, snap rolls, inside and outside loops, the Edge 540 can di it all.
- Wingspan - 63.5 inches
- Length - 60 inches
- Wing Area - 671.7 square inches
- Weight - 7-8 pounds
- Radio - 4 channels with 5 servos
- Engine - .61-1.00 2-stroke or .91-1.20 4-stroke
Sport Scale Airplanes
Dual Ace 46 Twin ARF - Model SEA4025
Do not be intimidated by the Dual Ace's twin-engine setup. Even if you have never flown one before, you will soon discover that Seagull's Dual Ace is the perfect introduction airplane to twin-engine models. It is so stable and easy to fly that it will even fly safely on a single engine - just in case the other should go out during mid-flight. Just drop a pair of your favorite .40 or .46 2-stroke glow engines into this plane and sit back, you're about to enjoy one powerful and smooth flight. It is made from the same type of quality balsa and plywood found in Hangar 9 planes. The two-piece plug-in wing is easy for transportation and storage. The sharp UltraCote scheme, fiberglass nacelles, tailcone, and nonecones give it a grade-A appearance that is certain to turn heads.
- Wingspan - 70 inches
- Length - 59 inches
- Wing Area - 862 square inches
- Weight - 11 pounds
- Radio - 4 channels with 7 servos
- Engine - .40-.46 2-stroke
Harmon Rocket 46 ARF - Model SEA3050
Seagull Models version of John Harmon's record-setting customized RV-4 is not going to break any airspeed marks, but it will definitely provide hours of thrilling aerobatic performance. Perform perfect high-speed dives, rolls, and loops. Knife-edge and slow flight is tons of fun too while snap rolls are very precise, stopping the exact moment you release the controls. Assembly is simple and quick. A pilot figure is factory mounted inside the canopy.
- Wingspan - 54.4 inches
- Length - 52 inches
- Wing Area - 636.5 square inches
- Weight - 6-7 pounds
- Radio - 4 channels with 5 servos
- Engine - .40-.46 2-stroke or .56-.82 4-stroke
Decathlon 40 ARF - Model SEA2075
The Seagull Model Decathlon 40 goes the extra mile with this high-quality aerobatic high-wing aircraft for sport and scale modelers. Intermediate to advanced aerobatic pilots looking for superb sport performance at a very reasonable price can not go wrong with this top performing airplane.
- Wingspan - 67.75 inches
- Length - 50 inches
- Wing Area - 762 square inches
- Weight - 7-8 pounds
- Radio - 4 channels with 6 servos
- Engine - .40-.46 2-stroke or .50-.72 4-stroke
Spacewalker II 40 ARF - Model SEA2050
Seagull's Spacewalker II is a fun, flyer-friendly airplane that is able to perform spins, stalls, stable slow flight, and more. Basic aerobatics like rolls, loops, and inverted flight are a breeze. And, you will find it capable of tight high-rate turns and loops with no fear of tip-stalling. The Spacewalker II is a great Sunday plane, easy to fly, easy to build, and an especially easy to land airplane.
- Wingspan - 61 inches
- Length - 45 inches
- Wing Area - 603 square inches
- Weight - 6-7 pounds
- Radio - 4 channels with 5 servos
- Engine - .32-.48 2-stroke or .40-.72 4-stroke
|
