RC Helicopters Kits

BEAM HELI USA Beam 450 E4 Helicopter Kit: Beam Heli USA

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

No options to buy: Carbon Fiber/CNC machined aluminum construction with full (33) ball bearings included
Ultra-low parts count design, for easy servicing and reduced weight
Drive system: Direct Drive tail drive pulley system for reduced noise and drag
Main frame: one piece wide spaced carbon frame with high quality aluminum bearing blocks, cross-members, and boom mounts
Main rotor head: CNC aluminum rotor head assembly complete with high_G 3D thrust bearings
Tail Rotor: durable one-piece CNC aluminum tail case and tail blade grips
Swashplate: beautifully machined, all aluminum, adjustable and serviceable swashplate for the ultimate in precise control
Main drive: dual bearing autorotaion unit with delrin main gear for increased durability and reduced play
Landing gear: specially designed, virtually unbreakable landing skids with etched skid tubes, standard in the box

Overview

If you're looking for a 450 class Heli that sets a new standard for quality and performance, the BEAM E4 was made just for you.

From the first concept to the final CAD drawing, Beam engineers designed the E4 to be better than other offerings in design, quality and performance. A no holds barred, no options required approach was declared.

From its easy to follow assembly manual and ease of assembly (major assemblies arrive pre-built) to it super-high quality of design, we think you'll celebrate the Beam 450 electric Heli at the first opening of the box!

We cannot downplay the performance and flying characteristics of this heli, right out of the box. Virtually any aerobatic manuver you can dream up can be accomplished from a stock assembly, due to all-original upgrade parts included as part of the kit! The model also flies quieter and more efficiently due to the unique design of the Direct Drive tail drive pulley system.

Specifications

Type: 450 Electric Kit
Main Rotor Diameter: 723 mm
Tail Rotor Diameter: 150 mm
Gross Weight: 29.3 oz (832 g) fully loaded, 13 oz (370 g) empty
Length: 660 mm
Main Gear Ratio: 1:10.7:4.6 or 1:9.4:4.6 (With included 14T and 16T Pinions)
Motor Size: 3550 kv brushless
Kit/ARF/RTF: Kit
Control System: 120 CCPM
Rotor Blade Length: 325 mm
Gender: Unisex
Minimum Age Recommendation: 18 years
Experience Level: Intermediate
Recommended Environment: Outdoor
Assembly Time: 10-15 Hours
Is Assembly Required: Yes

Align Corporation Limited T-Rex 700 Nitro Pro, Yellow Canopy

Wed, 19 Nov 2008 01:26:00 GMT

Align RC Part AGNKX018001A. T-REX 700 NITRO PRO, YELLOW CAN.

Align Corporation Limited T-REX 600 Nitro Super Pro Combo w/o engine, Red

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

●T-REX 600 Nitro Pro Kit
●600D Carbon Fiber Blades
●Blue Anodized parts
●50 High Performance Muffler
●2 In 1 Voltage Regulator Combo
●RCE-G600 Governor
●Painted fiberglass canopy
●Frame brace
●Carbon Fiber Tail Boom

Align Corporation Limited T-REX 600 Nitro Super Pro Combo w/o engine, Yellow

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

T-REX 600 Nitro Pro Kit
600D Carbon Fiber Blades
Black Anodized parts
50 High Performance Muffler
2 In 1 Voltage Regulator Combo
RCE-G600 Governor
Painted fiberglass canopy
Frame brace
Carbon Fiber Tail Boom

E-flite Blade 400 3D PNP Electric Mini Helicopter

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Completely factory-assembled airframe
Capable of sport flying and 3D aerobatics right out of the box
Factory-installed DS75 Digital Sub-Micro servos and G110 Micro Heading Lock gyro offer precise and powerful control
Included 420H brushless motor and 25-amp brushless ESC deliver incredible power and performance
CCPM control with push-pull elevator and direct-to-swash aileron/pitch linkages

Overview

The Blade® 400 3D is designed to give intermediate to advanced heli pilots a almost ready-to-fly experience like no other. The completely factory-assembled airframe allows the Blade 400 3D PNP to be ready for hovering and 3D aerobatics once you add your favorite transmitter, receiver, battery and charger.

Specifications

Main Rotor Diameter: 28.2 in (718mm)
Tail Rotor Diameter: 5.3 in (135mm)
Gross Weight: Without battery, 18.0-18.5 oz (510-525 g)
Length: 25.6 in (650mm)
Motor Size: 420H brushless outrunner, 3800Kv (installed)
Kit/ARF/RTF: PNP (Plug-N-Play)
Control System: DS75 Digital Sub-Micro Servos (4 installed), 120-degree CCPM
Rotor Blade Length: 325mm
Minimum Age Recommendation: 14 years

Needed to Complete

Transmitter
Receiver
Battery
Charger

E-flite Blade 400 3D ARF Replacement Airframe

Wed, 19 Nov 2008 01:26:00 GMT

E-flite RC Part EFLH1401. Blade 400 3D ARF Replacement Airframe.

Align Corporation Limited T-REX 500EP CF Kit Combo w/Motor/ESC/CF Blades

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Simple and lightweight design for excellent flight performance and extreme 3D capability.
Factory painted fiberglass canopy
Aluminum Main Rotor Head
425mm Carbon Fiber Blades included
Brushless motor and adjustable switch-mode BEC Brushless speed controller included
Carbon Fiber Main frame

JR Vibe 50 3D Pro Heli Kit: V3D

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Dual stage main gear
CNC machined aluminum head block
Push-pull control on all cyclic servos
Forward mount engine
120 or 140 CCPM control system
Prepainted fiberglass canopy
Accepts 600–620mm blades
High tilt flybar
Governor mount and pre-drilled clutch for governor magnets
Breakaway body mounts
High efficiency two-piece fan housing
Hi-cyclic head for extreme cyclic response
Driven tail with free-floating aluminum shaft
Robust clutch, drivetrain from Vibe 90
Easily removed, vibration-isolated tank
Weight adjustable flybar paddle design
Dual yoke T/R actuator
FRP canopy with decals

Overview

JR’s Vibe .50 was designed to provide outrageous 3D flight, but in a smaller, more affordable package.

“The Vibe 50 flies light and responsive” says John Adams. “With the stock paddles, the flip rate is crazy – so fast, that for the first time, I might dial it down a bit. And yet the hover is rock solid.”

Everything about the Vibe .50 screams performance. The sleek, narrow profile reduces drag for smoother, faster backward flight. A dual-stacked frame, similar to the 90 model, creates an exceptionally rigid structure vital for mind-bending maneuvers. Fact is, many of the drivetrain parts are directly from the Vibe 90, resulting in an incredibly strong 50 model. The 120/140 CCPM, so vital to precise handling, has been faithfully reproduced to assure flying qualities that will be a superb combination of precision and pizzazz. And the engine gear ratio is optimized to allow the YS/OS engines to develop great horsepower.

While the new Vibe may be the most potent JR 50 heli ever, JR’s legendary quality and ease of operation make your Vibe a joy to build and service. Modular construction and careful engineering make the Vibe perfect for active 3D fliers. The engine drops out in a couple of minutes. Ditto for tank and tail rotor systems. As Horizon’s John Adams puts it, “The Vibe 50’s awesome to work on.”

The more you look into the Vibe, the more you’re going to want one.

Specifications

Type: 50-size glow-powered 3D Pro Heli
Main Rotor Diameter: 52.8 in (1341mm)
Tail Rotor Diameter: 10.4 in (264mm)
Gross Weight: 7.8–8.25 lb (3538–3742 g)
Length: 49.5 in (1257mm)
Main Gear Ratio: 8.7:1:4.7
Engine Size: .50 cu in (8.17cc)
Control System: 120 or 140 CCPM
Rotor Blade Length: 600–620mm

Align Corporation Limited T-Rex 600 Nitro Pro Kit, Red Fiberglass Canopy

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Align Corporation Limited T-Rex 600 Nitro Pro Kit, White Fiberglass Canopy

Wed, 19 Nov 2008 01:26:00 GMT

Align Part AGNH1655. T-Rex 600 Nitro Pro Kit, White Fiberglass Canopy.

Align Corporation Limited T-Rex 600 Nitro Kit, Plastic Canopy

Wed, 19 Nov 2008 01:26:00 GMT

Align Part AGNH1650. T-Rex 600 Nitro Kit, Plastic Canopy.

Align Corporation Limited T-REX 450SE V2 Kit Silver/Mtr/ESC/LiPo/Wood Blades

Wed, 19 Nov 2008 01:26:00 GMT

Align T-REX 450SE V2 Kit, Silver/Mtr/ESC/LiPo/Wood Blades. Model AGNH1253CB.

Align Corporation Limited T-REX 450SE V2 Kit Black/Mtr/ESC/LiPo/Wood Blades

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Aluminum rotor head, swashplate and tail assemblies
Black carbon fiber frames and tail fins

Align Corporation Limited T-REX 450SE V2 Kit,Slvr w/Motor/ESC/LiPo/CF Blades

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Aluminum rotor head, swashplate and tail assemblies
Silver carbon fiber frames and tail fins
430XL motor, 35X ESC and 3S 11.1V 2100mAh Li-Po battery
325mm carbon fiber main rotor blades
Factory-painted fiberglass canopy

Align Corporation Limited T-REX 450SE V2 Kit,Blk w/Motor/ESC/LiPo/CF Blades

Wed, 19 Nov 2008 01:26:00 GMT

Product Features

Aluminum rotor head, swashplate and tail assemblies
Black carbon fiber frames and tail fins
430XL motor, 35X ESC and 3S 11.1V 2100mAh Li-Po battery
325mm carbon fiber main rotor blades
Factory-painted fiberglass canopy