RC Servo Accessories

KO Propo America Aluminum Upper Servo Case: PDS2367, 2368, 2386

Wed, 19 Nov 2008 01:30:04 GMT

KO Propo RC Part KOP35024. Aluminum Upper Servo Case: PDS2367, 2368, 2386.

JR Gear Set: DS3500G

Wed, 19 Nov 2008 01:30:04 GMT

JR RC Part JRPSG3500G. Gear Set: DS3500G.

Traxxas Servo Horns, Steering Long(2),Short(2): Revo3.3

Wed, 19 Nov 2008 01:30:04 GMT

Traxxas RC Part TRA5345R. Servo Horns, Steering Long(2),Short(2): Revo 2008.

Traxxas Servo Mount, Throttle 4x10mm (2):Revo 2008,SLY

Wed, 19 Nov 2008 01:30:04 GMT

Traxxas RC Part TRA5325R. Servo Mount, Throttle 4x10mm (2): Revo 2008.

JR Servo Case: DS368BB

Wed, 19 Nov 2008 01:30:04 GMT

JR RC Part JRPSC368BB. Servo Case: DS368BB.

JR Gear Set: S185

Wed, 19 Nov 2008 01:30:04 GMT

JR Radios Part JRPSG185. Gear Set: S185.

JR Hardware Set: S185

Wed, 19 Nov 2008 01:30:04 GMT

JR Radios Part JRPA240. Hardware Set: S185.

Traxxas Servo Horns, Steering:EMX

Wed, 19 Nov 2008 01:30:04 GMT

Traxxas Part TRA3968. Servo Horns, Steering:EMX.

Traxxas Servo Case/Gaskets: TRA2056,2075

Wed, 19 Nov 2008 01:30:04 GMT

Traxxas Part TRA2074. Servo Case/Gaskets: TRA2056,2075.

Traxxas Gear Set: TRA2065

Wed, 19 Nov 2008 01:30:04 GMT

Traxxas Part TRA2064. Gear Set: TRA2065.

Traxxas Servo-Case/Gaskets: TRA2065

Wed, 19 Nov 2008 01:30:04 GMT

Traxxas Part TRA2063. Servo-Case/Gaskets: TRA2065.

Spektrum 3D Arm Set w/screw, Fine Spline DSP75

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP754. 3D Arm Set w/screw, Fine Spline DSP75.

Spektrum Standard Arm Set w/Screws, Fine Spline DSP75

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP753. Standard Arm Set w/Screws, Fine Spline DSP75.

Spektrum Case Set DSP75

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP752. Case Set DSP75.

Spektrum Gear Set DSP75

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP751. Gear Set DSP75.

Spektrum 7.5 Gram Super Sub-Micro Digital Prog Servo

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Digital
Programmable (Airplane, Helicopter, Tail-Rotor)
Universal connector
Includes complete mounting hardware
Includes an assortment of servo arms

Overview

The DSP75 offers superior speed, torque and precision for the class, and includes complete mounting hardware and an assortment of servo arms. You can optimize its performance for specific applications like airplanes, helicopters and tail rotors by adjusting the endpoints, gain and even direction using the Digital Servo Programmer (SPMDSP - sold separately). The DSP75 is a great choice for parkflyers as well as mini and micro helis.

Specifications

Size Category: Minis and Micros
Type: Digital
Torque: 19.0 oz/in @ 4.8v
Speed: .11 sec/60° @ 4.8v
Dimensions (WxLxH): .90 x .45 x .94 in (23 x 12 x 24mm)
Weight: .26 oz (7.5 g)
Bushing Or Bearing: Bushing
Motor Type: Coreless
Connector Type: Universal
Gear Type: Nylon

Spektrum 3D Arm Set w/screw, Fine Spline DSP60

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP604. 3D Arm Set w/screw, Fine Spline DSP60.

Spektrum Standard Arm Set w/Screws, Fine Spline DSP60

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP603. Standard Arm Set w/Screws, Fine Spline DSP60.

Spektrum Case Set DSP60

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP602. Case Set DSP60.

Spektrum Gear Set DSP60

Wed, 19 Nov 2008 01:30:04 GMT

Spektrum Part SPMDSP601. Gear Set DSP60.

Spektrum Spektrum Digital Servo Programmer

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Servo reversing
Three-point programming
Deadband programming
High-speed input
3 servo modes

Overview

Spektrum’s Digital Servo Programmer offers the ultimate combination of precision and customization for digital micro servo users. Features like 3-point programming, high-speed input and three servo modes make the Digital Servo Programmer perfect for parkflyer, micro-heli and indoor foamie pilots. The DSP allows users to program their servos for optimum operation in whatever function they need, and the customization potential offered by the Digital Servo Programmer lets micro servo users experience the precision and smooth response offered by larger servos and aircraft without sacrificing performance.

Align Corporation Limited Magnetic Ring / RF Filter (3)

Wed, 19 Nov 2008 01:30:04 GMT

Align Part AGNR1000. Magnetic Ring / RF Filter (3).

Sonic Tronics, Inc. Composite Servo Arms,JR (4)

Wed, 19 Nov 2008 01:30:04 GMT

Overview

JR, Cox/Sanwa Servo Arms. 4 arms per package. Injection Molded from engineered composite materials containing long carbon fibers. This combination of materials bring the modeler a super performance product. They are larger, stronger and more rigid than any other standard servo arm available. When models are powered by 90, 120 or larger engines or are 1/4 and 1/3 size, higher performance products are a required item for safety. Two Versions available. The 8 pack has two each of four types, two double arms, two each of the small, medium, and large single servo arm. The 4 pack has one each of four types. One "X" arm, double arm, and one each of small and medium single arm.

SONIC TRONICS, INC. Composite Servo Arms,FUT

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Futaba Servo Arms. 4 arms per package.
Injection Molded from engineered composite materials containing long carbon fibers. This combination of materials bring the modeler a super performance product. They are larger, stronger and more rigid than any other standard servo arm available. When models are powered by 90, 120 or larger engines or are 1/4 and 1/3 size, higher performance products are a required item for safety. Two Versions available. The 8 pack has two each of four types, two double arms, two each of the small, medium, and large single servo arm. The 4 pack has one each of four types. One "X" arm, double arm, and one each of small and medium

SONIC TRONICS, INC. Composite Servo Arms,JR (8)

Wed, 19 Nov 2008 01:30:04 GMT

Overview

JR, Cox/Sanwa Servo Arms. 8 arms per package. Injection Molded from engineered composite materials containing long carbon fibers. This combination of materials bring the modeler a super performance product. They are larger, stronger and more rigid than any other standard servo arm available. When models are powered by 90, 120 or larger engines or are 1/4 and 1/3 size, higher performance products are a required item for safety. Two Versions available. The 8 pack has two each of four types, two double arms, two each of the small, medium, and large single servo arm. The 4 pack has one each of four types. One "X" arm, double arm, and one each of small and medium single arm.

SONIC TRONICS, INC. Composite Servo Arms,FUT

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Futaba Servo Arms. 8 arms per package. Injection Molded from engineered composite materials containing long carbon fibers. This combination of materials bring the modeler a super performance product. They are larger, stronger and more rigid than any other standard servo arm available. When model...

OFNA Racing Division Inserts, Aluminum CNC Servo Arm (2)

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10759. Inserts, Alum CNC Servo Arm (2).

OFNA Racing Division Aluminum CNC L Servo Arm, Purple: JR, AIR, HR

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10752. Alum CNC L Servo Arm,Purp:JR,AIR,HR.

OFNA Racing Division Aluminum CNC L Servo Arm, Blue: JR, AIR, HRC

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10751. Alum CNC L Servo Arm,Bl:JR,AIR,HRC.

OFNA Racing Division Aluminum CNC L Servo Arm, Yellow: JR, AIR, HRC

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10750. Alum CNC L Servo Arm,Yel:JR,AIR,HRC.

OFNA Racing Division Aluminum CNC Double Servo Arm, Red: JR, AIR

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10743. Alum CNC Dbl Servo Arm,Red:JR,AIR.

OFNA Racing Division Aluminum CNC Double Servo Arm,Purple: JR, AIR

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10742. Alum CNC Dbl Servo Arm,Purp:JR,AIR.

OFNA Racing Division Aluminum CNC Double Servo Arm, Blue: JR, AIR

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10741. Alum CNC Dbl Servo Arm,Blue:JR,AIR.

OFNA Racing Division Aluminum CNC Double Servo Arm,Yellow: JR, AIR

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10740. Alum CNC Dbl Servo Arm,Yel:JR,AIR.

OFNA Racing Division Aluminum CNC Servo Arm, Red: JR, Air

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10733. Alum CNC Servo Arm, Red:JR,Air,.

OFNA Racing Division Aluminum CNC Servo Arm, Purple: JR, AIR, HRC

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10732. Alum CNC Servo Arm,Purp:JR,AIR,HRC.

OFNA Racing Division Alum CNC Servo Arm,Blue: JR, AIR, HRC, FUT

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10731. Alum CNC Servo Arm,Blue:JR,AIR,HRC,FUT.

OFNA RACING DIVISION Alum CNC Servo Arm,Yel:JR,FUT,AIR

Wed, 19 Nov 2008 01:30:04 GMT

OFNA Racing Part OFN10730. Alum CNC Servo Arm,Yel:JR,FUT,AIR.

Kimbrough Products Splined Servo Arm,HD:HRC

Wed, 19 Nov 2008 01:30:04 GMT

Kimbrough Products Part KIM132. Splined Servo Arm,HD:HRC.

Kimbrough Products Servo Gear Saver,Large

Wed, 19 Nov 2008 01:30:04 GMT

Kimbrough Products Part KIM123. Servo Gear Saver,Large.

Kimbrough Products Splined Servo Arm,HD:FUT

Wed, 19 Nov 2008 01:30:04 GMT

Kimbrough Products Part KIM120. Splined Servo Arm,HD:FUT.

Kimbrough Products Spline Servo Arm,HD:AIR,JR

Wed, 19 Nov 2008 01:30:04 GMT

Kimbrough Products Part KIM111. Spline Servo Arm,HD:AIR,JR.

JR SPORT Gear Set: Servo Retract RT88

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94070. Gear Set: Servo Retract RT88.

JR Sport Gear Set: Servo High-Torque MG125,MG126

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94060. Gear Set: Servo High-Torque MG125.

JR SPORT Gear Set: Servo ST47, 47BB

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94050. Gear Set: Servo ST47, 47BB.

JR SPORT Gear Set: Servo MN48

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94040. Gear Set: Servo MN48.

JR SPORT Gear Set: Servo MC35

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94030. Gear Set: Servo M35.

JR SPORT Gear Set: Servo SM15 SM22

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94020. Gear Set: Servo SM15 SM22.

JR SPORT Gear Set: Servo SM8

Wed, 19 Nov 2008 01:30:04 GMT

JR Sport Part JSP94010. Gear Set: Servo SM8.

JR Gear Set: Z9000S High-Speed, 8717, 9100S

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSGZ9000S. Gear Set: Z9000S High-Speed.

JR Gear Set: 9411SA

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG9411SA. Gear Set: 9411SA.

JR Gear Set, Alloy:8611,8611A,Z9000T,8711,9100T

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG8611. Gear Set, Alloy: 8611, 8611A, Z9000T.

JR Gear Set:Hyb UL Speed 8417,SA Z4800S

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG8417H. Gear Set:Hyb UL Speed 8417,SA Z4800S.

JR Gear Set: Hybrid: 8411SA,8311

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG8411SA. Gear Set:Hybrid;8411SA,8311.

JR Gear Set: 810G, 890G

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG810G. Gear Set:810G Sport Tail Servo.

JR Gear Set:791 Hi-Torque Retract Servo

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG791. Gear Set:791 Hi-Torque Retract Servo.

JR Gear Set: 3421SA

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG3421SA. Gear Set: 3421SA.

JR Micro Metal Gear Set: S241 & DS285

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSG241MG. Gear Set:241 Micro,Metal Gear.

JR Case 8411/17,8550,8800,4800,8700,8317

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPSC8411. Servo Case 8411/17, 8550, 8800, 4800, 8311.

JR MatchMaker

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Allows for the cycling of up to two separate servos at a time at variable speed rates.
Perfect for finding erratic servo behavior in the cycling mode.
Allows the precise digital centering of up to 2 servos at a time to help with setup on the building bench.

Overview

Setting up servos just got a whole lot easier, thanks to the new MatchMaker from JR®. The MatchMaker lets modelers accurately center servos, evaluate end points, and cycle servos at varying speeds, without ever having to switch on a transmitter. This is the perfect bench companion for any modeler looking to optimize servo performance and compatibility.

Specifications

Input Voltage: 4.8 - 6.0V
Dimensions (WxLxH): 1.54 x .75 x .50 in
Weight: .32 oz

JR Channel Xpander

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Allows operation of four servos from a single channel
Great for scale and sport applications
Each servo can be individually adjusted

Overview

Do you need an extra channel, but not a new radio? JR's new Channel Xpander lets modelers control up to 4 servos from a single channel.

Scale modelers can use it to activate lights, wheel brakes or open canopies. Sport and Aerobatic modelers will find it useful for activating smoke systems and deploying flaps. While it is non-proportional, the Channel Xpander allows modelers to adjust the activation and end points of each servo individually, as well as reverse direction. The unit is powered through the regular receiver pack, but can be powered separately with its own battery pack to keep current drain on the receiver pack to a minimum.

JR Matchbox Twin Pac (2)

Wed, 19 Nov 2008 01:30:04 GMT

Overview

JR's Matchbox servo matcher is a revolutionary new way for giant scale modelers and users of multiple servos on a specific channel to match those servos to a greater degree than ever before.

The matching dilemma
Digital servos have brought a whole new level of precision and power to the world of R/C flight. Even with all this precision, they are still subject to the inefficiencies that differences in linkage geometry can create when more than one servo is used on a single control surface. Often, geometric differences are more pronounced with digital servos because of their superior resolution and the fact that they produce 100% torque with just 1°of offset. Add to this the minute variations in power output and centering that identical servos of every brand have, and it's easy to see why matching servos to a task is a little tricky.

JR's simple solution
JR's new MatchBox is an ideal solution to the "matching dilemma," allowing modelers to match servos with precision and flexibility never before possible. Housed in a case about the size of an R610M micro receiver, the MatchBox plugs into any channel of a receiver that is driving more than one servo. Up to four servos can then be plugged into it and independently adjusted, using a simple selector dial and Increase/Decrease buttons on the MatchBox unit itself. Available adjustments include neutral point (sub-trim), end point, and reversing. It also offers the option of powering the servos connected to it via a separate battery pack. In the case of multiple servos on a single control surface, the MatchBox can be used to match each servo's output for better efficiency, as well as power them separately. This allows the modeler to retain a simple single receiver setup instead of having to resort to using two receivers to keep from running too much current through one.

The MatchBox is also ideal for multiple servos on a single channel that are tasked to different applications. A great example would be a scale airplane that has a steering servo and rudder servo that are both driven from the same channel. Not only could the modeler customize the endpoints for each, but the servo direction as well.

How it works
For as many adjustments as the MatchBox is able to perform, it is surprisingly easy to use. Numbers "0" through "9" are displayed on the selector dial. To select a servo and adjustment function, just turn the selector dial to the corresponding position then use the Increase/Decrease buttons to make the desired adjustment.

Position 0:
This is the default position the MatchBox needs to be turned to during normal operation. Any adjustments that are made are stored in memory when the MatchBox is returned to "0".

Position 1-4:
Selecting any of these positions allows the modeler to make servo neutral and end-point adjustments to the corresponding servo using a combination of stick position and the "INCR +" and the "DECR -" buttons.

Position 5-8:
Selecting any of these positions accesses servo reversing for the corresponding servo. Like positions 1-4, these adjustments are made using a combination of stick position (neutral) and the "INCR+" and "DECR-" buttons.

Position 9:
Modelers can reset the MatchBox to default settings by turning the selector to this position and simultaneously pressing the "INCR+" and "DECR-" buttons while turning on the power to the MatchBox. Weighing just over 1/3 ounce, a Matchbox could be put on every control surface of an aircraft without adding much weight at all. Even if each one is equipped with its own power supply, what little extra weight was added to the model would be negligible, as compared to the benefits of the added power and efficiency. The MatchBox includes detailed instructions for performing several different types of setup tasks. Once the adjustments have been made, the MatchBox can be mounted to any flat surface with double-sided servo tape or Velcro®. To find out more about this amazing new technology, stop by your local JR dealer. Experience the versatility and freedom of the MatchBox and you'll wonder how you ever got along without one.

JR MatchBox Servo Matching/Power System

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Digital servos have brought a whole new level of precision and power to the world of R/C flight. Even with all this precision, they are still subject to the inefficiencies that differences in linkage geometry can create when more than one servo is used on a single control surface. Often, geometric differences are more pronounced with digital servos because of their superior resolution and the fact that they produce 100% torque with just 1°of offset. Add to this the minute variations in power output and centering that identical servos of every brand have, and it's easy to see why matching servos to a task is a little tricky.

JR's simple solution

JR's new MatchBox is an ideal solution to the "matching dilemma," allowing modelers to match servos with precision and flexibility never before possible. Housed in a case about the size of an R610M micro receiver, the MatchBox plugs into any channel of a receiver that is driving more than one servo. Up to four servos can then be plugged into it and independently adjusted, using a simple selector dial and Increase/Decrease buttons on the MatchBox unit itself. Available adjustments include neutral point (sub-trim), end point, and reversing. It also offers the option of powering the servos connected to it via a separate battery pack. In the case of multiple servos on a single control surface, the MatchBox can be used to match each servo's output for better efficiency, as well as power them separately. This allows the modeler to retain a simple single receiver setup instead of having to resort to using two receivers to keep from running too much current through one.

The MatchBox is also ideal for multiple servos on a single channel that are tasked to different applications. A great example would be a scale airplane that has a steering servo and rudder servo that are both driven from the same channel. Not only could the modeler customize the endpoints for each, but the servo direction as well.

How it works

For as many adjustments as the MatchBox is able to perform, it is surprisingly easy to use. Numbers "0" through "9" are displayed on the selector dial. To select a servo and adjustment function, just turn the selector dial to the corresponding position then use the Increase/Decrease buttons to make the desired adjustment.

Position 0:

This is the default position the MatchBox needs to be turned to during normal operation. Any adjustments that are made are stored in memory when the MatchBox is returned to "0".

Position 1-4:

Selecting any of these positions allows the modeler to make servo neutral and end-point adjustments to the corresponding servo using a combination of stick position and the "INCR +" and the "DECR -" buttons.

Position 5-8:

Selecting any of these positions accesses servo reversing for the corresponding servo. Like positions 1-4, these adjustments are made using a combination of stick position (neutral) and the "INCR+" and "DECR-" buttons.

Position 9:

Modelers can reset the MatchBox to default settings by turning the selector to this position and simultaneously pressing the "INCR+" and "DECR-" buttons while turning on the power to the MatchBox. Weighing just over 1/3 ounce, a Matchbox could be put on every control surface of an aircraft without adding much weight at all. Even if each one is equipped with its own power supply, what little extra weight was added to the model would be negligible, as compared to the benefits of the added power and efficiency. The MatchBox includes detailed instructions for performing several different types of setup tasks. Once the adjustments have been made, the MatchBox can be mounted to any flat surface with double-sided servo tape or Velcro®. To find out more about this amazing new technology, stop by your local JR dealer. Experience the versatility and freedom of the MatchBox and you'll wonder how you ever got along without one.

JR Mid-Size Servo Tray,Aileron

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPA246. Mid-Size Servo Tray,Aileron.

JR Servo Tray,Aileron

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPA244. Servo Tray,Aileron.

JR Servo Tray,1 x 1

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPA243. Servo Tray,1 x 1.

JR Servo Tray,2 x 1

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPA242. Servo Tray,2 x 1.

JR Servo Tray,2 x 2

Wed, 19 Nov 2008 01:30:04 GMT

JR Part JRPA241. Servo Tray,2 x 2.

JR RF Filter: Ring Style (2)

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Reduces RF noise before it reaches the receiver
Snap and ring designs fit all radios and applications
A must-have for all electric gas and turbine applications

JR RF Filter: Snap Style (2)

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Reduces RF noise before it reaches the receiver
Snap and ring designs fit all radios and applications
A must-have for all electric gas and turbine applications

HITEC RCD INC. Servo Grease

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC58450. Servo Grease.

HITEC RCD INC. Servo Can Wing Mount: HS85 Micro

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC56307. Servo Can Wing Mount: HS85 Micro.

Hitec RCD Inc. Horizonal Wing Mount: HS60, 81,85

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC56306. Horizonal Wing Mount: HS60, 81,85.

Hitec RCD Inc. Hardware Set: HS-65

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55718. Hardware Set: HS-65.

HITEC RCD INC. Servo Horn Set: HS-56

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55711. Servo Horn Set: HS-56.

HITEC RCD INC. Servo Arms, Standard, Heavy Duty

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55710. Servo Arms, Standard, Heavy Duty.

Hitec RCD Inc. Servo Arms, Large, Heavy Duty

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55709. Servo Arms, Large, Heavy Duty.

Hitec RCD Inc. Servo Horn Set: HS-35/45/50/55/5055MG

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55708. Servo Horn Set: HS50/55.

Hitec RCD Inc. Half Metal Servo Horn: HS5125MG

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55707. Half Metal Servo Horn: HS5125MG.

HITEC RCD INC. Metal Horn: Digital Servo, Heavy Duty

Wed, 19 Nov 2008 01:30:04 GMT

Hitec RCD Part HRC55702. Metal Horn: Digital Servo, Heavy Duty.

HITEC RCD INC. Metal Horn: Digital Servo, Standard

Wed, 19 Nov 2008 01:30:04 GMT

Hitec Metal Servo Horn Digital Or Standard Servo

HANGAR 9 3D XL 1/2 Servo Arm 4-40: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3579. 3D XL 1/2 Servo Arm 4-40: FUT.

HANGAR 9 3D XL 1/2 Servo Arm 4-40: JR

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3578. 3D XL 1/2 Servo Arm 4-40: JR.

HANGAR 9 3D XL Full Servo Arm 4-40: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3577. 3D XL Full Servo Arm 4-40: FUT.

HANGAR 9 3D XL Full Servo Arm 4-40: JR

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3576. 3D XL Full Servo Arm 4-40: JR.

HANGAR 9 Heavy-Duty 1/2 Servo Arm 4-40: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3575. Heavy-Duty 1/2 Servo Arm 4-40: FUT.

HANGAR 9 HD 1/2 Servo Arm 4-40: JR

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3574. HD 1/2 Servo Arm 4-40: JR.

HANGAR 9 HD Full Servo Arm 4-40: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3571. HD Full Servo Arm 4-40: FUT.

HANGAR 9 HD Full Servo Arm 4-40: JR

Wed, 19 Nov 2008 01:30:04 GMT

Product Features

Gold anodized - CNC machined from aluminum and gold anodized
Eliminates flex found in plastic arms and wheels
Both wheels and arms feature pre-drilled and tapped 2mm or 4-40 holes
Wide variety of sizes that fit nearly any R/C application

HANGAR 9 Machined 1/2 Arm,Short: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3537. Machined 1/2 Arm,Short: FUT.

HANGAR 9 Machined 1/2 Servo Arm: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3536. Machined 1/2 Servo Arm: FUT.

HANGAR 9 Machined Full Servo Arm: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3535. Machined Full Servo Arm: FUT.

HANGAR 9 Machined 1/2 Arm,Short: JR/AIR

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3532. Machined 1/2 Arm,Short: JR/AIR.

HANGAR 9 Machined 1/2 Servo Arm: JR/AIR

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3531. Machined 1/2 Servo Arm: JR/AIR.

HANGAR 9 Machined Full Servo Arm: JR/AIR

Wed, 19 Nov 2008 01:30:04 GMT

Hangar 9 Part HAN3530. Machined Full Servo Arm: JR/AIR.

GS Racing Universal Servo Horn Set, Purple

Wed, 19 Nov 2008 01:30:04 GMT

GS Racing Part GSC900007PR. UNIVERSAL SERVO HORN SET, PURP.

GS Racing Universal Servo Horn Set, FlourescentL Yellow

Wed, 19 Nov 2008 01:30:04 GMT

GS Racing Part GSC900007FY. UNIVERSAL SERVO HORN SET,FL YEL.

Dynamite Mach Alum Servo Arm: HRC Purple

Wed, 19 Nov 2008 01:30:04 GMT

Overview

These ½ arms are drilled and tapped for 3mm-linkage hardware and offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex you often get with nylon and plastic servo arms. The “full” arm has drilled and tapped holes, as well as “blank” holes to house a wide range of throttle and brake linkage requirements.

Dynamite Mach Alum Servo Arm: HRC Red

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Mach Alum Servo Arm: HRC Black

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Mach Alum Servo Arm: HRC Blue

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Mach Alum Servo Arm: HRC Purple

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Mach Alum Servo Arm: HRC Red

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Mach Alum Servo Arm: HRC Black

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Mach Alum Servo Arm: HRC Blue

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: J/A Purple

Wed, 19 Nov 2008 01:30:04 GMT

Overview

These ½ arms are drilled for 3mm-linkage hardware and offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex you often get with nylon and plastic servo arms. The “full” arms have drilled holes, as well as a larger hole(s) to house a wide range of throttle and brake linkage requirements.

Dynamite Machined Alum Servo Arm: J/A Red

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: J/A Black

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: J/A Blue

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: Fut Purple

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: Fut Red

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: Fut Black

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite Machined Alum Servo Arm: Fut Blue

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite's precisely Machined Aluminum Servo Arms offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex often associated with nylon and plastic servo arms. The "full" arm has drilled and tapped holes, as well as "blank" holes to accommodate a wide range of throttle and brake link-age requirements. Sold one per package and available in four colors, they are available in both JR/Airtronics/KO and Futaba versions.

Dynamite 1/2 Machined Alum Servo Arm: J/A Purple

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: J/A Red

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: J/A Black

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: J/A Blue

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: Fut Purple

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: Fut Red

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: Fut Black

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite 1/2 Machined Alum Servo Arm: Fut Blue

Wed, 19 Nov 2008 01:30:04 GMT

Overview

Dynamite's precisely Machined Aluminum Servo Arms offer maximum steering control, as well as instantaneous throttle and brake response by eliminating the flex often associated with nylon and plastic servo arms. These 1/2 arms are drilled and tapped for 3mm-linkage hardware. Sold one per package and available in four colors, they are available in both JR/Airtronics/KO and Futaba versions.

Dubro Products Super Strength Std Servo Arms:AIR

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB857. Super Strength Std Servo Arms:AIR.

Dubro Products Super Strength Long Servo Arms:AIR

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB856. Super Strength Long Servo Arms:AIR.

Dubro Products Super Strength Standard Servo Arms: HRC

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB675. Super Strength Std Servo Arms:HRC.

Dubro Products Super Strength Standard Servo Arms: JR

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB674. Super Strength Std Servo Arms:JR.

Dubro Products Super Strength Standard Servo Arms: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB673. Super Strength Std Servo Arms:FUT.

Dubro Products Super Strength Long Servo Arms: HRC

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB672. Super Strength Long Servo Arms:HRC.

Dubro Products Super Strength Long Servo Arm: JR

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB671. Super Strength Long Servo Arm:JR.

Dubro Products Super Strength Long Servo Arm: FUT

Wed, 19 Nov 2008 01:30:04 GMT

Dubro Products Part DUB670. Super Strength Long Servo Arm:FUT.

CUSTOM ELECTRONICS Digital Servo Driver/Analyzer

Wed, 19 Nov 2008 01:30:04 GMT

Custom Electronics Part CEL1430. Digital Servo Driver/Analyzer.

CUSTOM ELECTRONICS Digital Servo Driver

Wed, 19 Nov 2008 01:30:04 GMT

Custom Electronics Part CEL1410. Digital Servo Driver.

ASSOCIATED ELECTRICS, INC. 4-Cell Battery Holder for 29123

Wed, 19 Nov 2008 01:30:04 GMT

Associated Electrics Part ASC29117. 4-Cell Battery Holder for 29123.

Associated Electrics, Inc. Servo Gear Sets, Metal

Wed, 19 Nov 2008 01:30:04 GMT

Associated Electrics Part ASC29107. Servo Gear Sets, Metal.