- Fully assembled and ready to operate
- Separately applied brake wheel and roof walk
- Molded truss rods with turnbuckles
- Molded plastic underframe with brake cylinder
- Screw mounted trucks for accurate tracking
- McHenry knuckle couplers installed
- Packed in a jewel case
PROTOTYPE AND BACKGROUND INFO:
The use of ice to refrigerate and preserve food dates back to prehistoric times. Through the ages, the seasonal harvesting of snow and ice was a regular practice of many cultures. By the turn of the 20th century, manufactured ice became more common. The Pacific Fruit Express (PFE), for example, maintained seven natural harvesting facilities, and operated 18 artificial ice plants. Their largest plant (located in Roseville, California) produced 1,100 tons of ice daily, and Roseville’s docks could accommodate up to 254 cars. At the industry’s peak, 1,200,000 tons of ice was produced for refrigerator car use annually.
A late-19th century wood-bodied reefer required re-icing every 250 miles (400 km) to 400 miles (640 km). The typical ice-bunker reefer from the 1920s were originally constructed with wood sheathing. Later, these early wood constructed cars would be replaced with steel constructed cars with plywood interiors by the 1940s. Vents in the bunker at the end of the car, along with slots in the wood floor racks, allowed cool air to circulate around the contents.
|COUPLER STYLE:||McHenry Scale Knuckle|
|ERA:||1890 - 1940|
|Minimum Age Recommendation:||14 years|
|Is Assembly Required:||No|
Search Terms: old time, refrigerator, wood, 36oldreefer, ath_0417