Features
- 85+ mph speed clocked using the pocket radar
- EPO foam construction
- Very simple assembly
- Brushless motor, ESC and servos installed
The RocHobby Swift was clocked at 85mph using a pocket radar. Not only is this plane fast but it also is very well mannered and very aerobatic. The wings and fuselage are a single piece of EPO foam with carbon rods molded in for maximum strength and durability. In addition the nose cone is a magnetic break away design, the servo pushrods are top mounted for maximum protection during belly landing, and there is a skid plate on the bottom to protect the fuse and the rear mounted prop. The plane is very simple to assemble so you can be in the air in about 30 minutes.
Specs
Wingspan: | 26.8 in (675mm) |
Overall Length: | 25 in (630mm) |
Flying Weight: | 20.1 oz (570g) |
Motor Size: | 2215-3400KV |
Radio: | 4 Channel |
Servos: | (2) 9g servos |
CG (center of gravity): | 9.1 in (230mm) from leading edge |
Prop Size: | 4.5 x 4.5E 2-Blade |
Speed Control : | 50A ESC |
Recommended Battery: | LiPo 11.1V 2200mAh 25C |
Aileron: | Yes |
Elevator: | Yes |
Rudder: | No |
Throttle: | Yes |
Flaps: | No |
Retracts: | No |
Charger: | Required |
Landing Gear: | No |
Resources
- 675mm Swift Manual 3.1 MB
Product Num:
ROH005P
RocHobby Swift, PNP, 675mm Reviews