Features
- Scale details including two hand painted pilots, radial engine and one piece propeller
- Visually appealing paint scheme gives the Waco a sporty look and makes the plane easy to see in the sky
- Made of durable EPO foam
- LED Navigation lights
- Steerable tail gear for easy taxi, take offs, and landings
- Four ailerons for extreme maneuverability
- Powerful brushless motor, ESC, and servos are all pre-installed
The RocHobby Waco really does fly like a dream. While there is plenty of power for loops, rolls, and inverted flight, the RocHobby Waco is very gentle at half throttle. There are no issues using short grass or pavement as a runway. Not only does the RocHobby Waco fly well but it is absolutely amazing to look at. This is one of the best looking Wacos. The yellow color really stands out in the sky and on the ground. FMS did a fantastic job with this RC airplane. Some of the most impressive details are the LED navigation lights, the detailed cowl, and the rigging. This plane should have a place in any hanger.
Specs
Wingspan: | 40.6 in (1030mm) |
Overall Length: | 31.9 in (810mm) |
Flying Weight: | Approximately 35.3 oz (1000g) |
Motor Size: | Brushless 3536-850KV |
Radio: | 4 Channel |
Servos: | 4 x 9g servos |
CG (center of gravity): | 3.3 in (85mm) from leading edge |
Prop Size: | 11 x 7, 2-blade propeller |
Speed Control : | 40A Brushless ESC |
Recommended Battery: | 11.1V 2200mAh 25C 3 cell Li-Po (Required) |
Aileron: | Yes |
Elevator: | Yes |
Rudder: | Yes |
Throttle: | Yes |
Flaps: | No |
Retracts: | No |
Approx. Flying Duration: | 5 minutes |
Approx. Assembly Time: | Less than 1 hour |
Charger: | Required |
Resources
- 1100mm Waco Manual - English 3.5 MB
Product Num:
ROH011PYEL
RocHobby Waco PNP, Yellow, 1100mm Reviews