Made from precision cut shim stock, CRC's new ride height adjusters come in .010", .020" and .030" thicknesses. Each size is a diff color to make identification easy. A small tab with a hole allows more convenient installation.

Each .010" equals about 1/4 of a millimeter (.25 mm) So .010" is .25 mm, .020 is about .5 mm, and .030 is approximately .76 mm.

The shim pieces are not slotted. The slots in the original batch of these would cause inconsistent ride height and camber settings as the slot would spread when the front end screws were tightened. The closed hole setup that comes in the package now is much stronger and more consistent.