Features
- Waterproof for all weather operation *
- 2-3S LiPo and 5-9 cell NiMH compatible
- Program functions changed with the use of jumper pins
- Up to an 12T motor limit
- Removable mounting tabs create an even smaller footprint and allow hard mounting in a wide variety of vehicles
- Crawler running mode
- Pre-wired with EC3 battery connector and RTR compatible motor bullets for easy installation
This waterproof, brushed ESC is NiMH/LiPo compatible and offers forward/brake/reverse, forward/brake and crawler drive modes. Its compatibility makes it an ideal replacement ESC or the perfect upgrade to your current non-LiPo, non-waterproof, or limited motor spec ESC.
* While waterproof, this component has not been designed to immerse in water for long periods of time and should NOT be treated like a submarine. Please be sure to read through the general precautions listed in the user’s manual.
Specs
Forward: | Yes |
Reverse: | Yes |
Brake: | Yes |
Time Delay Brake: | Yes |
Continuous Maximum Current: | FWD: 60A REV: 30A |
Input Voltage: | 2-3S Lipo, 5-9 cells NiMH/NiCd |
Input Connector Types: | EC3 |
Output Connector Types: | 3.5mm Tamiya style bullet |
Motor Limit: | 2S Lipo/6cell NiMh >=8T 540/550 closed endbell motors, 3S Lipo/9cell NiMh >=13T 540/550 closed endbell motors |
Momentary Peak Current: | FWD: 360A REV: 180A |
Length: | 1.48 in (37.5mm) |
Width: | 1.46 in (37mm) without tabs, 2.23 in (56.6mm) with tabs |
Height: | 0.71 in (18mm) |
Weight: | 1.41 oz (40g) |
BEC Voltage: | 5V |
PWM Frequency: | 1KHz |
Overload Protection: | Yes |
Full On Resistance: | .0008 ohms |
Wire Gauge: | 16AWG |
Auto Cutoff: | Yes |
Search Terms: DYN_BME, dyns2211, DYN4927WP, VTR03031, LOS03004, VTR03090, ECX01009, ECX03330T1ECX03330T2, ECX03331T1ECX03331T2, ECX03333T1ECX03333T2, ECX03354, ECX01010, ECX01011, VTR03093, VR03093, LOS03015, VTR03100, ECX03242T1ECX03242T2, ECX03243T1ECX03243T2, VTR03094, VTR03101T1, VTR03101T2, LOS03022T1, LOS03022T2, ECX03056, ECX03055