Team Losi Racing continues evolving the race truck platform with the new 22T 4.0 kit. Featuring new suspension geometry and laydown mid-motor driveline, it is designed to win straight from the box.
Team Losi Racing continues evolving the race truck platform with the new 22T 4.0 kit. Featuring new suspension geometry and laydown mid-motor driveline, it is designed to win straight from the box.
Features
- LIGHTWEIGHT 2.5MM HARD-ANODIZED 7075 T-6 ALUMINUM CHASSIS
- VLA FRONT SUSPENSION
- LAYDOWN 3-GEAR TRANSMISSION
- UPDATED BALL DIFFERENTIAL
- REVISED MOTOR LOCATION
- TRANSVERSE OR FORE-AFT BATTERY MOUNTING OPTIONS
- GENII, 12MM BIG-BORE SHOCKS
- TICN COATED SHOCK SHAFTS AND HINGE PINS
- ALUMINUM BLEEDER SCREW CAPS
- ADJUSTABLE REAR PIVOTS FOR TOE AND ANTI-SQUAT
- ADJUSTABLE ALUMINUM REAR CAMBER BLOCK
- BELL-CRANK STEERING SYSTEM
- HDS SLIPPER WITH HD SPRING
- SPINDLE WITH ADJUSTABLE TRAIL AND ACKERMANN
- REAR HUB WITH ALUMINUM PLATE
- NEW 22T 4.0 PRE-CUT BODY
- MOTOR COOLING FAN
The TLR® 22T 4.0 Stadium Truck kit takes the competition-proven on-track performance of the 22T 3.0 and gives it an advanced, mid-motor laydown transmission treatment. With the wider track width and the relatively shorter chassis of the truck class, TLR engineers and the race team demanded higher development of the 22™ platform. The result is a next-level platform expected to dominate the ROAR National Championships.
The laydown transmission moves the motor forward to a central motor location. This helps the 22T 4.0 drive much flatter, more consistent and corners quicker on higher grip surfaces. Still fitting a brick pack, saddle pack, or a shorty pack mounted across the chassis, drivers can maximize performance with best weight bias for all surfaces. In short, we've taken the race winning 22T 3.0 and added the "laydown" setup to maximize the performance.
Specs
Type: | 2WD Stadium Race Truck Kit |
Scale: | 1/10 |
Length: | 13.9 in (354mm) without Body/Wheels |
Width: | 12.7 in (322mm) |
Height: | 5.65 in (143mm) |
Wheelbase: | 11.4 in (290.5mm) |
Chassis: | 2.5mm 7075-T6 Aluminum |
Suspension: | Lower A-Arm, Upper Adjustable Link |
Drivetrain: | 2WD |
Motor or Engine: | Sold Separately |
Speed Control: | Sold Separately |
Radio: | Sold Separately |
Servos: | Sold Separately |
Batteries: | Sold Separately |
Charger: | Sold Separately |
Gear Pitch: | 0.06 Module |
Wheel Size: | 2.20 in (56mm) |
Kit/RTR: | Kit |
Shock Type: | 12mm Big Bore, Oil Filled |
Body: | 22T 4.0, Clear Polycarbonate |
Ball Bearings: | Full Rubber Sealed |
Experience Level: | Advanced |
Recommended Environment: | Indoor/Outdoor |
Assembly Time: | 3-5 Hours |
Is Assembly Required: | Yes |
Needed to Complete
- Battery Charger Motor Electronic Speed Control Servo Radio System Tires 48 Pitch Pinion Gear Paint Tools Glue
Search Terms: bfnov19