==
Losi 8IGHT-T Nitro RTR: 1/8 4WD Truggy
Price:
$719.99
Sale Price:
$399.99
You Save:
$320.00
Qty:
Manufacturer: Losi

This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.

This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.

Video Overview

Features

  • Your fast track to nitro truggy racing
  • 4mm T-6 aluminum chassis plate
  • Spektrum ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Metal-gear transmission and sealed differentials
  • Pre-set suspension geometry
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum™ waterproof metal-gear servo
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack

If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Specs

Type:Nitro Truggy
Scale:1/8
Length:18.75 in (476mm)
Width:16.38 in (416.1mm)
Height:7.30 in (185.5mm)
Wheelbase:14.93-15.09 in (379-383mm)
Chassis:4mm Plate, Aluminum
Suspension:4-wheel Independent
Drivetrain:4WD
Tire Type:Losi XTT
Motor or Engine:Dynamite .28 Nitro Engine
Radio:DX2E
Servos:Included
Batteries:Dynamite NiMH Battery 6V 1600mAh Reciever Pack 3+2 Hump
Gear Pitch:1.0Mod
Kit/RTR:RTR
Shock Type:15mm bore, Composite
Body:Painted/Screened
Ball Bearings:Full Precision Ball Bearings
Fuel Tank Capacity:150cc
Experience Level:Beginner
Recommended Environment:Outdoor

Needed to Complete

  • • 20–30% Nitromethane fuel
  • • Nitromethane-Approved Dispenser
  • • NiMH Charger
  • • Glow Igniter

Search Terms: 8IGHTBT16, 8BTRTRN

Resources

Product Num:
LOS04011
RCslot.com has been providing online hobby supplies since 2007!
12+ years of great service!