Hitec RCD Inc. Sail Arm HS-765HB: Universal
Price:
Sale Price:
$39.99
You Save:
$23.96
Manufacturer: Hitec RCD Inc.
Hitec's HS-765HB Sail Arm Servo
Hitec's HS-765HB Sail Arm Servo
Features
- Up to 140 degrees of travel
- 4.5 inch arm
- Dual Ball Bearing Supported Output Shaft
- *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail
The HS-765HB sail arm servo has up to 140 degrees of travel and comes with a Heavy Duty 4.5 inch arm. With its dual ball bearing supported output shaft the HS-765HB will provide years of reliable service for your R/C sailing applications to 2 meters.
Specs
Size Category: | Specialty |
Type: | Analog |
Application: | Sailing |
Torque: | 153 oz-in (11.0kg-cm) @ 4.8V; 183 oz-in (13.2kg-cm) @ 6V |
Speed: | 0.28 sec/60 deg @ 4.8V; 0.23 sec/60 deg @ 6V, at no load |
Length: | 2.32 in (59.0mm) |
Width: | 1.14 in (29.0mm) |
Height: | 1.97 in (50.0mm) |
Weight: | 3.88 oz (110g) |
Bushing Or Bearing: | Bearing |
Bearing: | Dual |
Motor Type: | 3 Pole |
Connector Type: | Universal |
Gear Material: | Karbonite |
Current Draw Idle: | 8mA |
Current Draw Stall: | 1500mA @ 4.8V; 1800mA @ 6V |
Voltage: | 4.8V to 6.0V |
Deadband: | 5µs |
Technical Notes
Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Search Terms: hs, hb, 765, hs765hb, bb, MMRADIO/ACCESSORY, MMRADIO/ACCESSORY, mmservos
Resources
- Servo Manual 350 KB
- Spec Sheet 705 KB
Product Num:
HRC33765S
Hitec RCD Inc. Sail Arm HS-765HB: Universal Reviews