Hitec RCD Inc. Sail Winch HS-785HB: Universal
Price:
Sale Price:
$49.99
You Save:
$29.96
Manufacturer: Hitec RCD Inc.
Hitec's HS-785HB Sailboat Sail Winch Servo
Hitec's HS-785HB Sailboat Sail Winch Servo
Features
- Dual Ball Bearing Supported Output Shaft
- Large Drum Wheel
- Perfect replacement winch servo for the Pro Boat Ragazza
- *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail
The HS-785HB sail winch servo with it's large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.
Specs
Size Category: | Specialty |
Type: | Analog |
Application: | Sail winch |
Torque: | 153 oz-in (11.0kg-cm) @ 4.8V; 183 oz-in (13.2kg-cm) @ 6V |
Speed: | 1.68 sec/60 deg @ 4.8V; 1.38 sec/60 deg @ 6V, at no load |
Length: | 2.32 in (59.0mm) |
Width: | 1.14 in (29.0mm) |
Height: | 1.97 in (50.0mm) |
Weight: | 3.88 oz |
Bushing Or Bearing: | Bearing |
Bearing: | Dual |
Motor Type: | 3 Pole |
Connector Type: | Universal |
Gear Material: | Karbonite |
Current Draw Idle: | 8mA |
Current Draw Stall: | 1500mA @ 4.8V; 1800mA @ 6V |
Voltage: | 4.8V to 6.0V |
Deadband: | 5µs |
Technical Notes
Note: Be aware that high vibration gas (not glow) engines combined with large control surfaces and large throws (3D models) can put undue strain on the gears. Metal geared servos are recommended for these applications even if under 12lbs.
Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail.
Search Terms: hs, hb, 785, hs785hb, bb, MMRADIO/ACCESSORY, MMRADIO/ACCESSORY, mmservos
Resources
- Servo Manual 350 KB
- Spec Sheet 573 KB
Product Num:
HRC33785S
Hitec RCD Inc. Sail Winch HS-785HB: Universal Reviews